Drawer Bottom/Rear Mending Wedges 50 pieces

Availability: In Stock

Order within , and get it between and

£3.06

20% VAT included

£3.06

Quantity :

Plastic · 50 pieces

These drawer wedges support sagging drawer bases from underneath, restoring stability to drooping panels across your furniture.

These drawer bottom rear mending wedges brace weakened base grooves and reinforce the rear joint to prevent panels from bowing or slipping out.

50-piece repair pack: The 50-piece pack supplies enough drawer pieces to fix multiple storage units throughout the home.
Transparent plastic finish: The neutral transparent material provides an unobtrusive repair underneath the drawer base.
Targeted groove reinforcement: Bracing the base panel against the rear backboard stops bottom drawers from dropping under heavy loads.

BedroomOverloaded clothes chests
Realigns sagging base panels so overloaded drawers slide open and shut without catching on the frame below.
KitchenHeavy cookware storage
Reinforces the rear drawer joint against the extra downward pressure of pans and cutlery trays.
WorkshopFurniture restoration
Provides a quick retrofit repair for failing drawer grooves without needing to dismantle the whole drawer box.

Screws not included

1
Push the base into place
Empty the drawer and press the sagging base panel back up into its rear groove.
2
Position the wedge
Slot the plastic wedge into the corner where the base panel meets the rear board.
3
Drive the fixing screw
Secure the wedge through its central hole with a suitable wood screw to lock the base firmly in position.

Manufacturer
Elnick UG
Zechenstraße 3,
44536 Lünen, Germany
info@elnick.de