Learn how to measure hole centres using the System 32 standard to find the perfect replacement furniture handles, bar handles, and fixings for your cabinets.

Reordering Furniture Handles & Bar Handles: Find Replacements by Hole Spacing (System 32)

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

The hole spacing on furniture handles defines the exact dimension between the centres of two drill holes and is based as standard on System 32 across the European furniture industry.Anyone wishing to replace a damaged handle or refresh the appearance of an existing cabinet front is bound by the existing drilling pattern. An exact determination of measurements is essential, as...

Read more 0
Learn how to correctly adjust soft-close cabinet door dampers for light and heavy fronts. Step-by-step guide to damper travel, hinge adjustment, and troubleshooting.

Adjusting Door Dampers: Optimally Adapting Soft-Close Travel for Heavy and Light Cabinet Doors

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

A door damper slows down the closing motion of a cabinet door and gently, silently pulls it into the carcase over the final centimetre.Correctly adjusting the damping mechanism is an essential step during furniture assembly. Uncontrolled slamming of fronts will damage the material over time, whilst excessive damping prevents the door from closing completely. Especially with bespoke installations or complex...

Read more 0
Discover how to repurpose a compact bedside table into practical bathroom storage. Learn about the right dimensions, moisture protection, and essential hardware.

Bedside Table for the Bathroom — Dimensions, Solutions, Ideas

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

A bedside table in the bathroom serves as a compact side unit that functionally fills unused alcoves next to the washbasin or shower thanks to modest dimensions, typically measuring 40 cm in width and 30 cm in depth.Bathrooms are frequently compact and offer little floor space for traditional bathroom furniture. Repurposing a bedside cabinet from the bedroom range proves to...

Read more 0
Learn how to professionally install LED furniture strips on cabinets and shelving for flawless, glare-free indirect lighting. Step-by-step instructions.

Installing LED Furniture Strips: Step-by-Step Guide for Indirect Cabinet Lighting

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

Indirect lighting on a cabinet carcass using LED furniture strips produces a glare-free illumination created by reflection against walls or furniture surfaces, accentuating spatial depth.Proper installation of LED strips on furniture involves far more than simply sticking down a ribbon of light. To guarantee a long service life for the diodes and an even light distribution, thermal and electrical parameters...

Read more 0
Discover the technical differences between soft-close damping and self-closing mechanisms in furniture fittings and how to choose the right hardware.

Soft-Close vs. Self-Closing: Definition of Damping Systems

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

Soft-close is a hydraulic or pneumatic damping system that closes furniture doors and drawers gently and silently. Self-closing, on the other hand, is a purely mechanical spring mechanism that actively pulls a drawer shut over the final few centimetres without slowing it down. Both systems are frequently combined in furniture hardware, yet they are technically fundamentally different.What exactly are soft-close...

Read more 0
Learn the standards of the 32 mm line drilling system in cabinet making, including exact hole spacing, hole diameters, and selecting the right shelf supports.

Line Drilling (32 mm Grid): Spacing & Diameter for Shelf Supports

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

Line drilling based on the 32 mm grid is a standardised system in cabinet making where drill holes for shelf supports, hinges, and runners are spaced at an exact distance of 32 mm from each other. The typical drilling diameter for these continuous rows of holes is 5 mm, whilst the standard distance from the cabinet front edge is 37...

Read more 0
Discover the differences between cylinder locks and surface-mounted locks for furniture, covering installation, backset measurements, and ideal use cases.

Cylinder Lock vs Surface-Mounted Lock — Furniture Locks Compared

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

A cylinder lock is recessed flush into a precisely drilled hole in the furniture front, whereas a surface-mounted rim lock is fixed onto the inside of the door leaf or drawer back.Choosing the Right Locking MechanismWhen securing existing furniture or fitting a locking mechanism during a DIY build, woodworkers and installers need to select the right fitting. The furniture locks...

Read more 0
Discover technical parameters for choosing and mounting heavy-duty, height-adjustable table legs compatible with popular desks and DIY tabletops.

Height-Adjustable Table Legs: Sturdy Alternatives Compatible with IKEA Desks

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

Height-adjustable table legs are mechanical support elements for tabletops that allow ergonomic adjustment of working height and compensate for uneven floors via integrated threaded feet or telescopic mechanisms.Anyone using a desk or worktable from popular furniture retailers such as IKEA often finds over time that the standard table legs reach their limits. Simple tubular designs frequently lack stability, particularly when...

Read more 0
Discover the differences between the standardised System 32 hole pattern and bespoke drilling for furniture fittings, hinges, and drawer runners.

System 32 (Line Boring) vs. Custom Drilling: Cabinet Making Concepts Compared

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

System 32 is a standardised construction principle in furniture making featuring a continuous hole spacing of 32 mm, whereas custom drilling relies on precisely calculated, point-by-point fixings without a visible grid.Choosing between a standardised line of holes and custom drilling is one of the most fundamental questions when constructing cabinet carcasses. Both approaches define how fittings such as hinges, runners,...

Read more 0
Learn how to replace and adjust IKEA Utrusta concealed cabinet hinges. Step-by-step guide to choosing the right overlay, drilling patterns, and 3D adjustment.

Replacing Concealed Hinges: Matching Replacements for IKEA Utrusta Hinges

  • Furniture Hardware Guides
  • 25 Aug, 2026
  • Posted By: Furnica

The IKEA Utrusta hinge system is based on a standard concealed hinge with a 35 mm cup diameter and can be replaced with standard furniture hinges featuring an identical drilling pattern.Kitchen cabinets from the Swedish furniture retailer use standardised fittings to mount door fronts. When a hinge wears out, the door sags, or the soft-close damper fails, replacing the entire...

Read more 0